We Keep A Fully Stocked Inventory of the Most Common Exhaust System Parts For Main Engines & Generators

Will Call / Walk Up Service Available.  Conveniently Located Within Fort Lauderdale’s Marina Mile District and Adjacent to the Fort Lauderdale International Airport.  We Fill Urgent and Emergency Parts Orders on Request.

Common Main Engine & Generator Exhaust System Parts

* Call For Verification of Parts Availability
  • Silicone (Blue) Single Hump Hose

    • Designed to help reduce vibration between the engine exhaust outlet and muffler or exhaust tube. These hoses can withstand temperatures up to 350 deg. F (177 deg.C (SAEJ2006) dimensions are I.D. x Length. (Hoses with 10″ I.D. and up should be triple clamped on each end, any hose with a smaller than 10″ I.D. should be double clamped.
  • Silicone (Blue) Double Hump Hose

    • Designed to help reduce vibration between the engine exhaust outlet and muffler or exhaust tube. These hoses can withstand temperatures up to 350 deg. F (177 deg.C (SAEJ2006) dimensions are I.D. x Length. (Hoses with 10″ I.D. and up should be triple clamped on each end, any hose with a smaller than 10″ I.D. should be double clamped.
  • Temperature Alarm Switch

    • Temperature Alarm Switches are normally open and activate (close) at 220 deg. F.
  • Neoprene (Black) Hose

    • Neoprene hose can sustain temperatures up to 250 deg. F. We stock a complete collection of Corrugated, Softwall and Wirebound Softwall Neoprene Hoses.
  • Softwall Wirebound Neoprene Hose

    • Wire reinforcement provides additional strength for longer connections with excellent flexibility. Recommended for runs longer than four times the I.D. of the hose.
  • Softwall Neoprene Hose

    • Softwall neoprene hose (non-wire) is designed for straight routings and can withstand temperatures up to 250 deg/F(121 deg C).
  • V-Band Clamps

    • V-Band Clamps are used to pull together and connect 2 circular (V-Band type) flanges. Constructed from heavy duty stainless steel.
  • AWAB Clamps

    • AWAB hose clamps are 316L Stainless Steel with roller band edges to eliminate the risk of damage to the hose.
  • T-Bolt Clamps For Silicone Hose

    • We stock a complete line of T-bolt Clamps for both Silicone Hose (blue) and Neoprene Hose (black). The band is constructed T-BOLT CLAMPS FOR SILICONE HOSE of 3/4″ wide 301 Stainless Steel and 18-8 Stainless Steel T-Bolt and Lock Nut.
  • T-Bolt Clamps For Neoprene Hose

    • We stock a complete line of T-bolt Clamps for both Silicone Hose (blue) and Neoprene Hose (black). The band is constructed T-BOLT CLAMPS FOR SILICONE HOSE of 3/4″ wide 301 Stainless Steel and 18-8 Stainless Steel T-Bolt and Lock Nut.
  • Turbo Covers

    • Insulation Blankets for the turbo outlet of the engine. All turbo covers in stock are silver, but we can fabricate them in either black, gray or white upon your request.
  • Sweep Covers

    • Insulation blanket for the turbo inlet manifold. All sweep covers in stock are silver, but we can fabricate them in either black, gray or white upon your request.
  • Stanchion Support Kits

    • These Stanchion Kits are used to support exhaust risers and elbows to the engine or transmission. All risers and elbows weighing ten pounds or more must be supported to help prevent damage. (Choice of Matteor Polished finish.)
  • Silkolene Sealant

    • Designed for sealing joints to prevent leakage of high temperature air or other hot gases. Silkolene Sealant can resist temperatures from 200 deg.C to 800 deg. C.
  • Crush Sleeves

    • Crush Sleeves are 14 gauge 316L stainless steel construction
  • Exhaust Installation Kits

    • Exhaust Installation Kits include all components required to install an exhaust system to the turbo of the specified engine.
  • Band Straps

    • Band Straps are designed to fit around elbows or tube sections to provide to fit as close to possible to the I.D. of the connecting surface. A connection point for support stanchions as required by your system. Band Straps come in either a Standard (Matte) finish or a Polished Finish.
  • Flexitallic Gaskets

    • Flexitallic gaskets are designed for dry service, and are rated for temperatures up to 1500 deg. F. They do not have bolt holes, and are designed to fit on flat , clean, dry surfaces. The dimensions are O.D. (outside diameter) x I.D. (inside diameter), and the gasket should be sized to fit as close to possible to the I.D. of the connecting surface.
  • Corrugated Neoprene Hose

    • Neoprene hose can sustain temperatures up to 250 deg. F. We stock a complete collection of Corrugated, Softwall and Wirebound Softwall Neoprene Hoses.
  • Pipe Plugs

    • Pipe Plugs are removable plugs with square heads, located on the flange of the exhaust riser which allows access for exhaust measurements such as back pressure readings and/or installation for thermal couple.
  • Silicone (Blue) Hose

    • Designed for wet exhaust or raw water service. These hoses can withstand temperatures up to 350 deg.F(177 deg. C). Silicone Hose is sold by the foot and hoses with 8″ ID and above are sold in 3′ lengths only. (SAE J2006) hoses with 10″ ID and up should be triple clamped on each end, any hose with a smaller than 10″ ID should be double clamped on each end.
  • Bellows Kits

    • DeAngelo Marine Exhaust Bellows Kits are made specifically for DeAngelo Marine Exhaust systems. These kits include 2 v-band Clamps, a bellows unit, an insulation blanket, and installation instructions. The color options for the blankets are:Black, Gray, Silver and White.